Welcome to a comprehensive guide on resolving the frustrating “Your PC/Device Needs to Be Repaired” error. In this article, we will explore practical solutions to help you troubleshoot and fix this issue effectively. Say goodbye to the inconvenience and let’s dive into the solutions that will bring your PC or device back to life!
Causes for the “Windows Your PC Needs to Be Repaired” Issue
There are several potential causes for the “Windows Your PC Needs to Be Repaired” issue. One common cause is corrupted system files, which can occur due to improper shutdowns or disk errors. Another possibility is a problem with the boot files, which are essential for the operating system to start up properly. Viruses or malware can also be culprits, as they can damage critical system files.
To fix this issue, there are several methods you can try. First, you can use the Windows Recovery Environment utility to repair your system. This tool can be accessed by creating a recovery drive or using the recovery environment built into your computer. Another option is to use startup repair, which can automatically fix common startup issues. You can access this tool by pressing the “Power” button and then holding down the “Shift” key while selecting “Restart” from the dropdown menu.
If these methods don’t work, you can try using command prompt to manually repair your system. This involves using specific commands to fix boot configuration files and other issues. Finally, if none of these solutions work, you may need to reinstall Windows or seek professional help.
Remember to back up your important data before attempting any repairs, as some methods may involve modifying system files.
How to Run Startup/Automatic Repair
To run Startup/Automatic Repair on your PC or device and fix the “Your PC/Device needs to be repaired” error, follow these steps:
1. First, insert your Windows 10 recovery drive or installation media and restart your computer.
2. When your computer starts up, press the power button and immediately press the appropriate key to access the boot menu (usually F12 or Esc).
3. From the boot menu, choose the option to boot from the recovery drive or installation media. This will take you to the Windows Recovery Environment utility.
4. In the Windows Recovery Environment, select your language preferences and click “Next.”
5. On the next screen, click “Repair your computer” at the bottom left.
6. In the next window, select “Troubleshoot” and then “Advanced options.”
7. From the list of advanced options, choose “Startup Repair” and wait for the process to complete.
8. Once the repair is done, restart your computer and check if the error has been resolved.
If the error persists, you may need to try other troubleshooting methods or seek further assistance.
How to Run a Disk Check and System File Check
To run a disk check and system file check, follow these steps:
1. Restart your PC/Device and press the Power button to shut it down forcefully three times. This will trigger the Automatic Repair process.
2. On the Windows 10 Boot Options menu, select Troubleshoot.
3. In the Troubleshoot menu, choose Advanced options.
4. Select Command Prompt from the list of options.
5. In the Command Prompt window, type chkdsk /f C: and press Enter. This will initiate a disk check on your C: drive.
6. Once the disk check is complete, type sfc /scannow and press Enter. This will run a system file check.
7. Wait for the processes to finish and follow any on-screen instructions.
8. Restart your PC/Device and check if the “Your PC/Device needs to be repaired” error is resolved.
Remember to backup your important data before performing any troubleshooting steps.
How to Rebuild BCD
To rebuild the BCD and fix the “PC/Device needs to be repaired” error, follow these steps:
1. Boot your PC using a Windows installation media or recovery drive.
2. On the Windows Setup screen, select your language preferences and click “Next.”
3. Click on “Repair your computer” at the bottom left corner.
4. Select “Troubleshoot” and then “Advanced options.”
5. Choose “Command Prompt” from the list of advanced options.
6. In the Command Prompt window, type the following command and press Enter: bcdedit /export C:\BCD_Backup
7. Next, enter this command and press Enter: c:
8. Now, type the following commands one by one, pressing Enter after each: cd boot, attrib bcd -s -h -r, and ren c:\boot\bcd bcd.old
9. Finally, enter this command and press Enter: bootrec /rebuildbcd
10. Follow the on-screen prompts to complete the process.
Rebuilding the BCD can resolve issues related to boot files and configuration data, which may be causing the “PC/Device needs to be repaired” error. This method works for various error codes, such as 0xc0000225, 0xc000000e, 0xc0000098, and 0xc0000001. Remember to backup your important files before performing any system changes.
How to Create BCD
To fix the “PC/Device needs to be repaired” error, you can create a Boot Configuration Data (BCD) using the following steps:
1. Insert your Windows installation media or recovery drive into your PC.
2. Restart your computer and boot from the installation media.
3. When prompted, select your language preferences and click “Next.”
4. On the next screen, click “Repair your computer.”
5. In the recovery options, choose “Troubleshoot” and then “Advanced options.”
6. Select “Command Prompt” to open a command window.
7. In the command prompt, type “bootrec /rebuildbcd” and press Enter.
8. Windows will scan for installed operating systems and ask you to add them to the BCD. Type “Y” and press Enter.
9. Restart your computer and check if the error is resolved.
Note: If you’re using a Mac or a virtual machine, the steps may vary. Consult your specific operating system’s documentation for guidance.
How to Set Correct Partition as Active
To set the correct partition as active and fix the “PC/Device needs to be repaired” error, follow these steps:
1. Start by shutting down your PC/device and inserting a Windows installation USB or DVD.
2. Boot your PC/device from the installation media and select your language preferences.
3. On the next screen, click “Repair your computer” at the bottom left corner.
4. Select “Troubleshoot” > “Advanced options” > “Command Prompt”.
5. In the Command Prompt window, type “diskpart” and press Enter.
6. Type “list disk” and press Enter to see a list of available disks.
7. Identify the disk that contains the partition you want to set as active.
8. Type “select disk [disk number]” and press Enter, replacing [disk number] with the actual number of the disk.
9. Type “list partition” and press Enter to see the partitions on the selected disk.
10. Identify the partition you want to set as active and type “select partition [partition number]“, replacing [partition number] with the actual number of the partition.
11. Type “active” and press Enter to set the selected partition as active.
12. Close the Command Prompt window and restart your PC/device.
By following these steps, you can successfully set the correct partition as active and resolve the “PC/Device needs to be repaired” error.
How to Recover Data From a Corrupt Drive
If you’re encountering the “Your PC/Device needs to be repaired” error, it’s possible that your drive has become corrupt. Luckily, there are ways to recover your data.
First, you’ll need to access the Advanced Startup Options. Restart your device and, when the Windows logo appears, press and hold the power button to force a shutdown. Repeat this process three times, and on the fourth startup, you should see the Advanced Startup Options.
From the Advanced Startup Options menu, select “Troubleshoot” > “Advanced options” > “Command Prompt”. In the Command Prompt window, type “chkdsk /f C:” and press Enter. This will scan and fix any errors on your drive.
If the issue persists, you can try using recovery tools like “System Restore” or “Startup Repair”. These tools can help restore your system to a previous working state.
Remember to back up your data regularly to prevent data loss in the future.
How to Fix the BCD Boot Sector
To fix the BCD Boot Sector error on your PC or device, follow these steps:
1. Start by booting your device from a Windows installation media or recovery drive.
2. When prompted, select your language preferences and click “Next.”
3. Click on “Repair your computer” at the bottom left corner of the screen.
4. Select “Troubleshoot” and then “Advanced options.”
5. Choose “Command Prompt” from the list of options.
6. In the Command Prompt window, type “bootrec /fixmbr” and press Enter.
7. After that, type “bootrec /fixboot” and press Enter again.
8. Finally, type “bootrec /rebuildbcd” and press Enter one more time.
9. Follow the on-screen instructions to select the Windows installation and confirm the changes.
10. Once the process is complete, type “exit” and press Enter to close the Command Prompt.
11. Restart your PC or device and check if the error is resolved.
By following these steps, you should be able to fix the BCD Boot Sector error and get your PC or device up and running again without any issues.
