Skip to content

Fix No Bootable Device Insert Boot Disk and Press Any Key

In this article, I will discuss how to troubleshoot the error message “Fix No Bootable Device Insert Boot Disk and Press Any Key.”

Common Causes of the Error

Common causes of the “No Bootable Device Insert Boot Disk and Press Any Key” error include issues with the BIOS settings, a faulty bootloader, a corrupted operating system, or a problem with the boot disk itself.

Check the BIOS settings to ensure the correct boot order is selected. Make sure the hard drive or SSD containing the operating system is set as the first boot device.

If the boot order is correct, the issue may lie with the bootloader. Try repairing or reinstalling the bootloader using the Windows Setup or Recovery Console.

In some cases, a corrupted operating system can cause this error. Attempt to boot into Safe Mode or use system recovery tools to repair the operating system.

If you are using a USB flash drive as a boot disk, ensure that the drive is functioning properly and that the computer recognizes it. Try using a different USB port or creating a new bootable USB drive.

If none of these solutions work, there may be a hardware issue with the hard drive or SSD. Check the connections and consider replacing the drive if necessary.

Effective Solutions for Boot Failure

  • Restart your computer and enter BIOS by pressing the designated key (usually Del or F2)
  • Navigate to the Boot tab using the arrow keys
  • Change the boot order to prioritize the drive with the operating system installed
  • Save changes and exit BIOS

Reconnect the Hard Drive

  • Turn off your computer and unplug it from the power source
  • Open the case and locate the hard drive
  • Disconnect and reconnect the hard drive cables
  • Close the case and plug in your computer
  • Restart your computer to see if the issue is resolved

Use System Restore

  • Restart your computer and press F8 repeatedly before Windows loads
  • Select Repair Your Computer from the advanced boot options menu
  • Choose System Restore and follow the on-screen instructions
  • Restore your computer to a previous point when it was working correctly
  • Restart your computer to check if the problem is fixed

Data Recovery Methods for Failed Boots

If your computer is displaying the error message “No Bootable Device Insert Boot Disk and Press Any Key,” there are several data recovery methods you can try to fix the issue.

One common method is to boot from a USB flash drive that contains a recovery tool or operating system installation files. You can create a bootable USB drive using Windows Setup or other software tools.

Another option is to access the Recovery Console through the Command-line interface. From here, you can run various commands to attempt to repair the boot files on your hard disk drive.

If you are dealing with a hardware issue, such as a faulty motherboard or hard drive, you may need to open up your computer to inspect and potentially replace the problematic component. Be sure to power off your personal computer or laptop before performing any hardware repairs.

If you are comfortable working with computer hardware, you can try reseating components like the central processing unit (CPU), graphics card, and memory modules. Sometimes a loose connection can cause boot failures.

In some cases, resetting the CMOS (Complementary Metal-Oxide-Semiconductor) settings on your motherboard can resolve boot issues. This typically involves locating and removing the button cell battery on the motherboard for a few seconds before reinserting it.

Preventing Future Boot Failures

To prevent future boot failures and the dreaded “No Bootable Device Insert Boot Disk and Press Any Key” error message, there are a few key steps you can take.

First and foremost, ensure that your computer’s BIOS settings are correctly configured. Access the BIOS menu by pressing the designated key during startup (usually Del, F2, or F12) and make sure the boot order is set correctly to prioritize the internal hard drive.

If you are using a UEFI system, make sure that the UEFI boot mode is enabled. This can usually be found in the BIOS settings under the boot options. UEFI allows for faster boot times and improved security.

Regularly check for software updates for your operating system, especially if you are using Microsoft Windows. Updates often include bug fixes and security patches that can help prevent boot failures.

It is also important to regularly back up your files to an external hard drive or cloud storage. This ensures that you can easily recover your data in case of a boot failure or other issue.

Perform regular maintenance on your computer, including cleaning out dust from the fans and checking for any loose connections. Overheating can cause hardware failures that may result in boot issues.

If you are experiencing persistent boot failures, consider running a diagnostic test on your hard drive using software tools provided by the manufacturer. This can help identify any potential hardware issues that may be causing the problem.


How to fix no bootable device insert boot disk and press any key?

To fix the issue of “no bootable device insert boot disk and press any key,” you can change the Boot Mode back to UEFI by accessing the BIOS menu. Turn off your PC and power it back on, then enter the BIOS menu by pressing the appropriate BIOS key.

How to fix no bootable device on HP?

To fix the “no bootable device” error on an HP computer, start by disconnecting any external devices. Then, restart the computer to see if the issue is resolved.

How to fix insert boot media in selected boot device and press a key?

To fix the “Insert boot media in selected boot device and press a key” error message, you need to adjust the boot order in the BIOS menu. Restart your computer and press the function key to access the BIOS menu, then navigate to the Boot tab and prioritize the drive with your operating system.

Was this article helpful?