In this article, I will discuss how to fix the error 0x80300001 that occurs during Windows installation.
Verify Installation Media Integrity
To verify the integrity of your installation media, you can follow these steps:
1. Insert the installation media (such as a USB drive or DVD) into your computer.
2. Open File Explorer and locate the drive where the installation media is inserted.
3. Right-click on the drive and select “Properties.”
4. Go to the “Tools” tab and click on “Check” under the Error-checking section.
5. Follow the on-screen instructions to scan the installation media for any errors.
6. If any errors are found, try using a different installation media or creating a new one.
By verifying the integrity of your installation media, you can ensure a smoother Windows installation process and avoid encountering error code 0x80300001.
Update BIOS and Device Drivers
| Step | Description |
|---|---|
| 1 | Check for BIOS updates on your computer manufacturer’s website. Download and install the latest BIOS version for your specific model. |
| 2 | Open Device Manager on your computer and look for any devices with a yellow exclamation mark indicating a driver issue. |
| 3 | Right-click on the device with the issue and select “Update Driver”. Follow the on-screen instructions to update the driver. |
| 4 | Repeat step 3 for any other devices with driver issues. |
Check Disk for Errors
1. Open Command Prompt as an administrator by searching for “cmd” in the Windows search bar and selecting “Run as administrator.”
2. In the Command Prompt window, type “chkdsk /f C:” and press Enter. Replace “C:” with the drive letter you want to check for errors.
3. If prompted to schedule a disk check on the next restart, type “Y” and press Enter.
4. Restart your computer to allow the disk check to run before Windows fully loads.
By running a disk check, you can identify and fix any errors that may be causing the 0x80300001 Windows installation issue.
Adjust BIOS Settings
If the error persists, return to the BIOS setup and disable Secure Boot. This option can sometimes interfere with the installation process. Save the changes and exit the BIOS. Attempt to reinstall Windows again to see if the problem has been resolved.
If you continue to encounter the Error 0x80300001, check for any firmware updates for your motherboard. Updating the BIOS can sometimes resolve compatibility issues that may be causing the installation problem. After updating the firmware, try reinstalling Windows to see if the issue has been fixed.
FAQs
How to solve Windows cannot be installed on this drive?
Windows cannot be installed on this drive. To solve this issue, ensure UEFI is enabled if you want to use Legacy, convert MBR, and then the error message should disappear, allowing you to install Windows.
How do I fix error code 0x80300002?
To fix error code 0x80300002, you can try booting your laptop, deleting all partitions to have 1 unpartitioned drive, and then clicking “next” to start the install process.
What does Windows failed to install the following update with error 0xc1900130?
Windows failed to install the following update with error 0xc1900130 can be resolved by running the Windows Update troubleshooter in the Settings menu. Restart your computer after running the troubleshooter to install the update successfully.
What is error code 0x80070017 when installing Windows?
Error code 0x80070017 when installing Windows can be caused by issues with your hard drive. Check for any errors or bad sectors by running a disk check. Additionally, remove any external devices like USB drives or external hard drives that could be causing installation errors.
