Struggling with a Windows 10 stuck preparing automatic repair loop? Let’s find a solution.
Overview of Automatic Repair Error Symptoms
Common automatic repair error symptoms in Windows 10 include:
– Continuous loop: Your computer may get stuck in a loop where it keeps trying to prepare automatic repair but fails to complete the process.
– Blue screen of death: You may encounter a blue screen with an error message indicating issues with automatic repair.
– Failure to boot: Your computer may fail to boot up properly, leading to repeated attempts at automatic repair.
– Error messages: You may receive various error messages related to automatic repair failure.
– Slow performance: Your computer may exhibit slow performance or freezing due to automatic repair errors.
If you are experiencing any of these symptoms, it can be frustrating and disruptive to your workflow. It is important to address these issues promptly to restore your computer’s functionality.
Identifying the Causes of the Repair Loop
- Check for Hardware Issues:
- Ensure all hardware components are properly connected.
- Check for any signs of physical damage.
- Run hardware diagnostics to identify any faulty components.
- Scan for Malware:
- Use a reputable antivirus program to scan for malware.
- Remove any detected threats and reboot the system.
- Check for Corrupted System Files:
- Open Command Prompt as an administrator.
- Run the sfc /scannow command to scan for and repair corrupted system files.
- Reboot the system after the scan is complete.
- Update Windows:
- Go to Settings and navigate to Update & Security.
- Click on Check for updates and install any available updates.
- Reboot the system after the updates are installed.
Recovering Data from the Repair Loop
To recover data from the repair loop in Windows 10, you can try booting into Safe Mode to access your files. Navigate to the Windows Boot Manager and select Safe Mode with Networking. Once in Safe Mode, you can copy your important files to an external USB flash drive or an SD card.
If Safe Mode doesn’t work, you can create a boot disk using another computer. Boot from the disk and access your files. Another option is to use a data recovery software to retrieve your files from the hard disk drive.
You can also try using the System File Checker (SFC) tool to repair corrupted system files. Open Command Prompt in Safe Mode and type “sfc /scannow” to run the tool.
If all else fails, you may need to perform a System Restore to revert your system to a previous state before the repair loop issue. This may help you recover your data and fix the problem.
Extending System Partition and Disabling Anti-Malware
To extend the system partition and disable anti-malware in order to fix the Windows 10 stuck preparing automatic repair loop, follow these steps:
1. Extend System Partition: Use a third-party partition manager tool to extend the system partition. This will help ensure that there is enough space for Windows to function properly.
2. Disable Anti-Malware: Temporarily disable any anti-malware software installed on your system. This can sometimes interfere with the booting process and cause the automatic repair loop.
3. Restart Your Computer: After extending the system partition and disabling anti-malware, restart your computer to see if the issue has been resolved.
If the problem persists, consider running a CHKDSK scan or using System File Checker to check for any corrupted system files. You may also want to try booting from a USB flash drive or boot disk to access additional troubleshooting options.
Utilizing System File Checker and Rebuilding BCD
To fix Windows 10 stuck in a preparing automatic repair loop, you can try using System File Checker to scan and repair corrupted system files.
Open Command Prompt as an administrator and type:
“`
sfc /scannow
“`
This will check for any corrupted system files and attempt to fix them automatically.
If the issue persists, you can try rebuilding the Boot Configuration Data (BCD) using Command Prompt.
Open Command Prompt as an administrator and type:
“`
bootrec /rebuildbcd
“`
This command will scan for Windows installations on your computer and rebuild the BCD store.
After running these commands, restart your computer and check if the issue has been resolved. If not, you may need to consider other troubleshooting steps such as running CHKDSK to check for disk errors or performing a System Restore to revert your system to a previous working state.
Restoring the Windows Registry
To restore the Windows Registry and fix the Windows 10 stuck in a Preparing Automatic Repair loop, you can follow these steps:
1. Boot into Safe Mode: Restart your computer and continuously press the F8 key until the Advanced Boot Options menu appears. Select Safe Mode and press Enter.
2. Access Command Prompt: Once in Safe Mode, press the Windows key + X and select Command Prompt (Admin) from the menu.
3. Backup the Registry: Before making any changes, it’s important to back up the registry. Type regedit into the Command Prompt and press Enter. Click on File, then Export, and save the registry backup to a safe location.
4. Restore the Registry: In the Command Prompt, type the following command and press Enter: sfc /scannow. This will scan and repair any corrupted system files, including the registry.
5. Reboot your computer: After the scan is complete, reboot your computer normally and see if the issue has been resolved.
Strategies for Black Screen Issues
One common issue that Windows 10 users face is getting stuck in a preparing automatic repair loop with a black screen. Here are some strategies to help resolve this problem:
First, try restarting your computer in Safe Mode. To do this, restart your computer and press F8 repeatedly before the Windows logo appears. This will allow you to access Safe Mode, where you can troubleshoot the issue.
If Safe Mode doesn’t work, you can try using the System Restore feature. Boot your computer using a Windows installation disk or USB drive, select “Repair your computer,” and then choose “System Restore.” This will allow you to restore your system to a previous point in time when it was working properly.
Another option is to use the Command Prompt to run a series of commands that can help fix the issue. Boot your computer using a Windows installation disk or USB drive, select “Repair your computer,” and then choose “Command Prompt.” From there, you can use commands like bootrec /fixmbr and bootrec /rebuildbcd to repair the master boot record and rebuild the boot configuration data.
If none of these strategies work, you may need to perform a clean install of Windows 10. This will erase all your data, so be sure to back up any important files before proceeding.
Checking Hardware and Reinstalling Windows
| Step | Description |
|---|---|
| 1 | Check hardware connections for any loose cables or components |
| 2 | Run hardware diagnostics to identify any faulty components |
| 3 | Reinstall Windows 10 using a bootable USB drive |
| 4 | Follow on-screen instructions to complete the installation process |
FAQs
How to fix automatic repair boot loop in Windows 10?
To fix the automatic repair boot loop in Windows 10, you can try using Windows 10 repair services, extending the system partition, disabling early launch anti-malware protection, running system file checker and CHKDSK, rebuilding BCD, restoring Windows registry, and performing a system restore.
How do I get my computer out of preparing automatic repair?
To get your computer out of the “Preparing Automatic Repair” loop, you can try running the Windows System File Checker (SFC) tool by typing sfc /scannow in Command Prompt. This can help repair any corrupted system files causing the issue.
How do I bypass automatic repair on Windows 10?
To bypass automatic repair on Windows 10, you can open Command Prompt as an administrator, type the command “bcdedit,” and ensure that the “recoveryenabled” and “identifier” values are set to “{current}” and “yes” under the “Windows Boot Loader” section.
How do I force repair startup on Windows 10?
To force repair startup on Windows 10, you can access the Advanced Startup Options by searching in Windows. Then, restart the computer and navigate to Troubleshoot, followed by Advanced Options and Startup Repair. From there, follow the on-screen prompts to select an account and allow the repair process to scan and fix any startup issues.
