Skip to content

Fix Windows Update Error Code 0x8024402c

Today, I will address how to fix Windows Update Error Code 0x8024402c.

Enabling Network Detection Settings

To enable Network Detection Settings to fix Windows Update Error Code 0x8024402c, follow these steps. First, open the Start menu and search for “Control Panel.” Next, navigate to “Network and Sharing Center” and click on “Change adapter settings.”

In the Network Connections window, right-click on your network connection and select “Properties.” Look for “Internet Protocol Version 4 (TCP/IPv4)” in the list and double-click on it.

In the Properties window, make sure the option “Obtain an IP address automatically” is selected. Then, click on “Obtain DNS server address automatically.” Click “OK” to save the changes.

After making these adjustments, try running Windows Update again to see if the error has been resolved. If not, you may need to troubleshoot further or seek additional assistance.

Modifying Proxy Exception List

  • Open Internet Explorer.
  • Click on the gear icon in the top right corner.
  • Select ‘Internet options’ from the drop-down menu.
  • Go to the ‘Connections’ tab.
  • Click on ‘LAN settings’.
  • Uncheck the box next to ‘Use a proxy server for your LAN’.
  • Click on ‘Advanced’.
  • Add the Windows Update URLs to the proxy exception list.
  • Click OK to save the changes.

Adjusting DNS Server Settings

To adjust DNS server settings to fix Windows Update Error Code 0x8024402c, follow these steps:

1. Right-click on the Windows Start menu and select “Network Connections.”
2. Locate your network connection, right-click on it, and select “Properties.”
3. Under the “Networking” tab, find “Internet Protocol Version 4 (TCP/IPv4)” and click on “Properties.”
4. Select “Use the following DNS server addresses” and enter the preferred and alternate DNS server addresses provided by your internet service provider.
5. Click “OK” to save the changes.

After adjusting the DNS server settings, try running Windows Update again to see if the error is resolved. If you continue to experience issues, consider troubleshooting other possible causes such as firewall settings or proxy server configurations.

Managing Software Distribution

To manage software distribution and fix Windows Update Error Code 0x8024402c, follow these steps:

Step 1: Ensure your internet connection is stable and working properly.

Step 2: Open the Windows Search bar, type “Troubleshoot settings,” and click on it.

Step 3: In the Troubleshoot settings window, select “Windows Update” and click on “Run the troubleshooter.”

Step 4: Follow the on-screen instructions to detect and fix any issues with Windows Update.

If the error persists, you may need to reset the Windows Update components. To do this, open Command Prompt as an administrator and run the following commands:
net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 Catroot2.old
net start wuauserv
net start cryptSvc
net start bits
net start msiserver

Restart your computer and check if the issue is resolved.

Configuring Update Client and Firewall

To fix Windows Update Error Code 0x8024402c, you need to configure the Update Client and Firewall. To configure the Update Client, open the Control Panel and go to “System and Security.” Click on “Windows Update” and then select “Change settings.” Under “Important updates,” choose the option to “Install updates automatically.”

Next, configure the Firewall by opening the Control Panel and selecting “System and Security.” Click on “Windows Defender Firewall” and then choose “Allow an app or feature through Windows Defender Firewall.” Select “Change settings” and then click on “Allow another app.”

Locate the Windows Update service in the list and check the boxes for both “Private” and “Public.” Click “OK” to save the changes. After configuring both the Update Client and Firewall, restart your computer and try running Windows Update again to see if the error is resolved.

Cleaning Boot and Junk Files

To fix Windows Update Error Code 0x8024402c, cleaning boot and junk files may help resolve the issue. First, open the Windows Search bar and type in “Disk Cleanup. ” Double-click to open the tool and select the drive you want to clean. Next, click on “Clean up system files” and check the boxes for “Previous Windows installations” and “Temporary Windows installation files. ” Click “OK” to start the cleaning process. Additionally, you can use a third-party software to clean up junk files and optimize your system for better performance.

Regularly cleaning boot and junk files can prevent errors like the 0x8024402c from occurring in the future.


How do I fix error code 0x8024402c?

To fix error code 0x8024402c, you can try enabling automatic network detection settings, removing invalid characters in the proxy exception list, changing DNS servers, deleting Software Distribution, accessing clean boot by restarting, configuring the updates client, and checking firewall settings.

How do I fix error code 0x80240438?

To fix error code 0x80240438, you should check the WSUS server configuration and ensure proper communication with the client. Verify firewall settings on both machines to prevent any blocking of communication. Additionally, check the WindowsUpdate.

Was this article helpful?